RUDDOG 1:10 2WD Buggy Slim Front Tire Inserts Medium

PERFECT DIMENSIONAL STABILITY AND DIRECT STEERING RESPONSE FOR NARROW FRONT TIRES.

In 1:10 2WD off-road racing, narrow front tires (Slim Front) often decide the handling on the track. Especially on high-grip surfaces like carpet, astro turf, or hard-packed clay, they ensure precise and predictable steering. The RUDDOG 2WD Slim Front tire inserts in the "Medium" hardness degree give the tire tread the optimal inner contour and effectively prevent the tire sidewalls from collapsing in fast corners.

Exact Fit for 18 mm Slim-Front Tires

With a width of around 18 mm, these inserts are precisely matched to narrow 1:10 2WD buggy front tires. They fill the tire evenly on the inside, ensuring that the tread always lies flat and stable on the track. This prevents unwanted tire flexing at high cornering speeds and provides direct, clear feedback to the transmitter.

The Versatile All-Rounder for Changing Conditions

With the "Medium" hardness degree, you hit the spot on almost any surface. The insert stabilizes the tire in fast corners without making the front axle too twitchy. The result is extremely consistent and forgiving handling over the entire run.

Highlights at a Glance

• Specially for 2WD Slim Front: Perfectly tailored to narrow 1:10 2WD buggy front tires with approx. 18 mm width.
• Medium Hardness: Balanced mix of high steering precision, good damping, and consistent grip.
• High Dimensional Stability: Prevents the tire sidewall from folding over during fast changes of direction.
• Even Contact Patch: Ensures continuous ground contact and predictable handling.
• Practical Set of 4: Enough to equip two complete sets of front tires.

Included

• 4x RUDDOG 1:10 2WD Buggy Slim Front Tire Insert Medium

Operating & Care Instructions

When gluing, make sure the insert is centered and not twisted inside the tire to avoid imbalance. If the inserts get wet when driving on a damp track, let the tires dry thoroughly in the air after use. This preserves the elasticity of the foam permanently.