#MR33-455016 - MR33 Pan Car Body Stiffener Set (2+2)

Set consisting of both body stiffeners for 1:12 pan cars. This allows you to stiffen the rear of a pan car body at the wheel arches and rear end, making it better equipped for action on the racetrack!

MR33-455014

The 3D-printed ring reinforces the side of the body around the wheel arches and ensures that it remains in the correct position. Especially if you are driving with a very wide rear axle and the tyres protrude beyond the body, you can use this stiffener to adjust the rear section so that the wheels run cleanly within the body again.  

A big advantage:You don't have to cut out the rear wheel cut-out unnecessarily large. 

Weight:Only 1.5 g for the set

.

Assembly:The stiffeners can be easily attached – either with MR33 body glue (or Hudy) or double-sided adhesive tape.

MR33-455015The

3D-printed MR33 rear stiffener provides more stability in the rear area of the body and reduces the chance of unwanted anti-tuck (jammed body). The rear remains more dimensionally stable. 

Weight:ly only 1.05 g for the set

.

Assembly: The stiffeners can be easily attached – either with MR33 body glue (or Hudy) or double-sided adhesive tape.