#SW-910035 - SWORKz S35-4 1/8 Competition Buggy

Code: SW-910035
RRP £555.00
Save £20.01


The SWORKz S35-4 1/8 Nitro is designed for pure racing. The geometry of the car provides optimized corner speed compared with easy handling and maximum traction.

The S35-4 features a T7075 hard anodized and lightened aluminium chassis with a wide layout that was tested for a long time by our factory pilots to guarantee the best performance.

The totally new developed HET differentials are included too and provide a traction, that is not possible with old systems.

The new S35-4 comes with a lower shock layout in front and rear and the construction of the shocks is adapted to that new optimized layout. The fixed shock spring plates will make it almost impossible to lose them anymore.

The steering geometry, with new Ackerman and steering plates, gives the driver the feeling of total control over the S35-4.

With the toe in plates, which now contain square inserts, you can adjust the geometry of your SWORKz S35-4 to fit to every track layout and track condition. Lower arms in front and rear are made of a newly developed composite material and fit exactely to the new chassis geometry. Side guards were redesigned in the same way.

With the new lightened wing support you can adjust position and angle of the wing to give your SWORKz S35-4 the perfect balance on the track. Together with the optimized new body shell, the aerodynamic system is working perfectly together.

Another new development in our SWORKz S35-4 is the totally new rear hub. Composite material combined with Carbon plates gives you the possibility for various setups. The newly developed Composite material is working perfectly together with the HET differentials to provide maximum traction.

There many more small changes and smart ideas in your new SWORKz S35-4, that make the car being a real winner.

The secret of a modern racing car is the possibility to adapt the setup to every track for top pilots but also have a standard setup that works on most tracks for hobby pilots.

And your SWORKz S35-4 is having these two characteristics in perfection.

The SWORKz development team focused on using materials, corresponding to the highest quality standards, when designing the car. You will find only 100% SWORKz quality in the S35-4 kit.   



Aluminium Parts in T7075

Optimized Composite Material

Stronger Downstop Area

More Balance Weight Positions

Adjustable Wing Angle

Adjustable Wing Position

Black Competition Shock Springs Included

2 Front Chassis Braces Included

3 HET Differentials Included

New Aerodinamically Optimized Body Shell

New Anticlock Screws for Shocks

New Multi Adjustable Ball System for Rear Upper Arms

New Composite Rear Hubs with Carbon Plates

New Body Posts Front and Rear

New Lower Front and Rear Arms

New Side Guards

New Lightweight Wing Mount

New Updated Toe In Plates with Square Inserts

New Steering Knuckle Plates

New Steering Balls

New Servo Saver Post Locking Design

New Servo Saver Plate

New Servo Saver Fixable Nut

New Servo Saver Aluminium Part

New Steering System

New Ackerman Plate

New 3mm Updated Rear Shock Studs

New Fixed Shock Spring Holder

New Shorter Front Shock Springs

New Shock Caps

New Shorter Shock Shafts

New Shorter Shock Bodies

New Lower Shock Towers

New Wide Chassis Design 

New T7075 Hard Anodized, Lightend Aluminium Chassis


Brand > Models
S-WORKZ, SWorkz, S35-4E,
Model Type
Unassembled - Kit
Power Type
Surface Type